11/2006
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Note
In the example of tool change cycle L6 you must replace "..." with values in
lines "DEF REAL _WWP=..." and "DEF REAL _SPP=...".
Tool change cycle L6 contains the following steps:
1. Position spindle (not when simulation is active)
2. Approach tool change positions in the machine coordinate system
3. Execute tool change (M206)
The tool must be at a safe height after tool change so that all motions in the
plane are permissible.
8 Tool Management
8.6
Tool change cycle
8-101