Cleaning The Paper Feed Rollers And Paper Feed Belt In The Interposer - Ricoh PRO 8100S Operating Instructions Manual

2. Clean the paper feed rollers.
3. Clean the guide board.
4. After cleaning, restore the machine so that it resumes operation.
• For details about detaching and reattaching the parts, see the Replacement Guide.

Cleaning the Paper Feed Rollers and Paper Feed Belt in the Interposer

Clean the paper feed belt and paper feed rollers in the interposer.
The procedure is explained using the interposer upper tray. The procedure is the same for the lower tray.
1. Remove the loaded paper.
2. Open the upper cover, and then detach the paper feed unit.
Pull it out slightly, release the metal shaft, and then detach it.
CEZ506
1
2
CEZ507
Cleaning the Paper Feed Path
103