Cleaning
Horizontal Encoder Sensor Cleaning
Preparation
1.
Remove the old horizontal encoder strip.
For details how to remove the horizontal encoder strip, see "Horizontal Encoder Strip" on the field
service manual.
2.
Prepare a horizontal encoder strip for cleaning (made of plastic).
• The horizontal encoder strip used for cleaning is made of plastic. The horizontal encoder strip
that is actually attached is made of metal. Make sure to use the metal horizontal encoder
when attaching (see "Horizontal Encoder Strip" on the field service manual).
[A]: Horizontal encoder strip made of plastic (for cleaning use)
[B]: Horizontal encoder strip made of metal
3.
Paste 2 cleaning felts [A] on both sides of the strip prepared in Step 2 [B] at the center.
Cleaning
101