Front Audio Header (Jp6) - Shuttle FN41 Manual

Front Audio Header (JP6)

C7
This header allows users to install auxiliary front-oriented microphone and line-
out ports for easier access. Either the Line-out connector on back- panel or JP4
header are available at the same time. If you would like to use this JP4 header
on front-panel, please remove all jumpers from JP4 and install your special Ex-
tra Mic / Line-out cable instead.
Two mini jumpers must be setted on pin5-6
and pin 9-10, when this header is not used.
Pins Assignment:
1=AUD_MIC
3=AUD_MIC_VCC
5=AUD_FRONT_R
7=LINE_IN_L
9=AUD_FRONT_L
1
3
5
7
9
2=AUD_GND
4=LINE_IN_R
6=AUD_RET_R
8=KEY
10=AUD_RET_L
- 33 -
Front Audio
1
JP6