Spdif In/Out Header (Jp9); Front Panel Audio Header (Jp10) - Shuttle FX43G User Manual

SPDIF In/Out Header (JP9)

C5
Port JP9 can be used to connect to a device with digital audio inputs/outputs.
JP9
6
5
4
3
2
1
1
Pin Assignments:
1=SPDIF_IN
3=VCC
5=VCC

Front Panel Audio Header (JP10)

C6
This header allows users to install an auxiliary Front-Oriented Audio port for
easier access. Either the Line-Out port connector on back panel or the Audio
header is available at the same time. If you would like to use the Audio header
on front panel, please remove all jumpers from it and install your special extra
audio cable instead. Two mini jumpers must be setted on pins 21-22 and pins
23-24 when this header is not used.
24
22
20
18
16
Pin Assignments:
15=GND
17=Front FMIC
19=Line-in-L
21=Line-out-R(in)
23=Line-out-L(in)
2=GND
4=GND
6=SPDIF_OUT
23
21
19
17
15
JP10
1
16=GND
18=FMIC Power
20=Line-in-R
22=Line-out-R(out)
24=Line-out-L(out)
- 32 -
SPDIF
1
JP9
15
9
JP10 1