Step 6 Connect Front Panel Switches/Leds/Speaker/Usb - Shuttle FN41 Manual

Step 6
Connect Front Panel Switches/LEDs/Speaker/USB
You can find there are several different cables already existing in the system
case and originating from the computer's Front-panel devices (HDD LED,
Power LED, Reset Switch, or USB devices etc.) These cables serve to connect
the front-panel switches, LEDs, and USB connectors to the mainboard's front-
panel connectors group (JP3,JP11, and JP8), as shown below.
USB 3
1
JP3
1. ATX Soft Power On/Off (POWER ON)
2. HDD-LED (HDD LED)
3. Green-LED and Power-LED (GREEN LED/POWER LED)
4. Hardware Reset Switch Button (RESET)
5. Extended USB Header
POWER ON
1
GREEN LED
3
POWER LED
USB4
1
JP11
RESET
4
HDD LED
2
1
USB port 4
- 16 -
Front Panel
1
JP8
1
5
+5V
USBD0- USBD1-
USBD0+ USBD1+
GND
KEY
+5V
USB port 3
GND
N/A