Shuttle FN41 Manual page 12

- Expansion Slots
Provides one 3.0 compliant AGP slot and one 32-bit PCI slots.
- 6 USB Interface Onboard
Ø 2 USB connectors on back-panel and two sets of dual USB ports headers
on mid-board.
- I/O Interface
Provides a variety of I/O interfaces:
Ø 1 Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 1 Composite TV-Out connector.
Ø 2 VGA Ports.
Ø 2 IEEE1394a Ports.
Ø 1 RJ45 LAN connector.
Ø 1 PS/2 Mouse connector.
Ø 1 PS/2 Keyboard connector.
Ø 1 Line-Out (Front-Out) port.
Ø 1 Rear out.
Ø 1 Bass/Center-Out port.
Ø 2 USB2.0 Ports
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133 Bus Master Dual-channel IDE ports provide support to a
maximum of four IDE devices (one Master and one Slave per channel). The IDE
Bus implements data transfer speeds of up to 133/100/66/33 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
- ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin standard ATX
power connectors, supporting Suspend and Soft-On/Off by dual-function
power button.
The Pentium 4 ATX power include other 4-pin +12V ATX power connector.
- 9 -