Extended Usb Headers (Usb2&3); Front-Panel Audio Header (Audio) - Shuttle AV42 User Manual

Extended USB Headers (USB2&3)
C5
These headers are used to connect cables to USB connectors mounted on
front-panel or back-panel. The USB cable is optional at the time of purchase.
Pin Assignments:
VREG_FP_USBPWR0
USB_FP_P0-
USB_FP_P0+
GND
KEY

Front-Panel Audio Header (AUDIO)

C6
This header allows users to install an auxiliary Front-Oriented Audio port for
easier access. Either the Line-Out port connector on back-panel or Front-Panel
Audio header is available at the same time. If you would like to use this header
on front-panel, please remove all jumpers from the Audio header and install
your special extra audio cable instead. Two mini jumpers must be setted on
pins 5-6 and pins 9-10, when this header is not used.
Pin Assignments:
AUD_RET_L
10
KEY 8
AUD_RET_R 6
AUD_VCC
4
AUD_GND
2
Pin Assignments:
1
1 2 VREG_FP_USBPWR0
3 4 USB_FP_P1-
5 6 USB_FP_P1+
7 8 GND
9 10 USB_FP_OC0
USB 2&3
Pin Assignments:
9 AUD_FRONT_L
7
N/C
5
AUD_FRONT_R
3
AUD_MIC_BIAS
1
AUD_MIC
1
AUDIO
- 31 -
1
USB 2&3
1
AUDIO