F
Front-Panel Connectors
ATX Power On/Off Switch Connector (POWER ON)
C1
The Power On/Off Switch is a momentary type switch used for turning on or off
the system ATX power supply. Attach the connector cable from the Power Switch
to the 2-pin (POWER ON) header on the mainboard.
Note : Please notice all the LED connectors are directional. If your chassis's
C2
HDD LED Connector (HDD LED)
Attach the connector cable from the IDE device LED to the 2-pin (HDD LED)
header. The HDD LED lights up whenever an IDE device is active.
LED does not light up during running, please simply change to the
opposite direction.
- 30 -
Front Panel
JP8 1
Front Panel
JP8 1