Install Usb2.0 Driver(Only For Winxp) - Shuttle FN41 Manual

4.4 Install USB2.0 Driver (Only for WinXP)
Select using your pointing device (e.g. mouse) on the "Install USB2.0
Driver" bar to install USB driver.
Once you made your selection, a Setup window run the installation
automatically.
When the copying files is done, make sure you reboot the system to take the
installation effect.
Note:
To install USB2.0 driver in WinXP,you must follow the steps list
below.
Step 1:
Please go to "Windows Update" (http://windowsupdate.microsoft.com) to
Install Microsoft USB 2.0 Host Controller Driver or Windows XP Service
Pack1.
Step 2:
Open Device Manager and open the properties for the USB 2.0 host control-
ler. Then Click 'Refresh' button and you will see the USB2.0 driver is install
already.
- 43 -