Green Led / Power Led Connector (Green Led/Power Led); Hardware Reset Connector (Reset) - Shuttle FN41 Manual

Green LED / Power LED Connector
C3
This header is dual color LED function.
Dual color LED function is defined by either Power LED or Green LED, the
header can be in these states.
The Green LED indicates that the system is currently in one of the power saving
mode (Doze/Standby/Suspend). When the system resumes to normal opera-
tion mode, the Green LED will go off, power LED on.
This Power LED will go off during power saving mode.
Attach a 2-pin Green LED/Power LED cable to (GREEN LED/POWER LED)
header.
POWER LED
4
2

Hardware Reset Connector (RESET)

C4
Attach the 2-pin hardware reset switch cable to the (RESET) header. Pressing
the reset switch causes the system to restart.
GREEN LED
4
2
- 31 -
(GREEN LED/POWER LED)
Front Panel
JP8 1
Front Panel
JP8 1