Extended Usb Headers (Jp7/Jp20); Front Panel Audio Header (Jp11) - Shuttle AN51R User Manual

E6

Extended USB Headers (JP7/JP20)

Headers JP7/JP20 (USB 5&6 and 7&8) are used to connect cables to USB
connectors mounted on front panel or back panel. The USB cable is optional
at the time of purchase.
2 4 6 8 10
JP 7
1
1 3 5 7 9
Pin Assignments:
1=VCC
3=Data0-
5=Data0+
7=Ground
9=KEY

Front Panel Audio Header (JP11)

E7
This header allows users to install an auxiliary Front-Oriented Audio port for
easier access. Either the Line-Out port connector on back panel or the front
panel Audio header is available at the same time. If you would like to use this
header on front panel, please remove all jumpers from it and install your spe-
cial extra audio cable instead. Two mini jumpers must be setted on pins 5-6
and pins 9-10 when this header is not used.
JP11
2 4 6 8 10
1
1 3 5 7 9
Pin Assignments:
1=AUD_MIC
3=AUD_MIC_VCC
5=AUD_FRONT_R
7=HP_ON
9=AUD_FRONT_L 10=AUD_RET_L
Default Setup:
Pin 5-6 : Short
Pin 9-10 : Short
2=VCC
4=Data1-
6=Data1+
8=Ground
10=N/C
2=AUD_GND
4=RESERVE
6=AUD_RET_R
8=KEY
- 40 -
1 1
JP 7
USB 5&6
JP11
1
Front Audio
USB 7&8