Shuttle FN41 Manual page 64

Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O
address and interrupt request(IRQ).
Ø The Choice: Disabled, 378/IRQ7, 278/IRQ5, or 3BC/IRQ7.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible, or SPP unless you are certain your hardware and
software both support one of the other available mode.
Ø The Choice: SPP, EPP, ECP, or ECP+EPP.
ECP Mode Use DMA
When the onboard parallel is set to ECP mode, the parallel port can use
DMA3 or DMA1.
Ø The Choice: 1 or 3.
- 61 -