Chapter 2 Configuration; First Startup - INIM Electronics Previdia Compact Manual For System Configuration, Commissioning And Maintenance

Configuration manual
Configuration
2.1

First startup

Once the installation and cabling procedures have been completed (refer to the Installation Manual of the Previdia
Compact system) the system is ready for first startup.
In the case of first startup and after having performed the procedure to set the factory data, it is necessary to enter the
unlock code:
This is a code printed on a special label, affixed to the cardboard box containing the control panel. Alternatively, it can be
found at the following Internet address (the serial number of the control panel will be requested, once provided the
unlock code will be provided):
https://service-previdia.inimcloud.com
Once the unlock code has been entered, you will be asked to select the required the language.
The control panel screen will be as follows:
Buttons to access the
events logs, system
[A]
status and
programming.
Status bar (always
present) shows
[B]
essential information
regarding the system.
[C]
"Home" button
In the case of faults or other types of events, the latter will be shown on the display. You can retrieve the home
screen at any time by tapping on the respective icon on the status bar [C].
In order to configure the Previdia control panel it is necessary to work through the following procedure:
1. Access programming (paragraph 2.2)
2. Access the configuration menu (paragraph 2.3)
Configuration
Please enter the code
printed on the control panel box
(also on https://service-previdia.inimcloud.com)
1 2 3 4 5 1 2 3 4 5
OK
B Access level:1
SHOW
1 2 3 4 5 1 2 3 4 5
ESC
Log
System status
Programming
01/01/2018 18:23
Chapter 2
A
C
7