Table 109 Call Schedule Edit - Nortel BSR222 Configuration

388 Chapter 21 Call scheduling screens
If a connection has been already established, your Business Secure Router will not
drop it. After the connection is dropped manually or it times out, that remote node
can not be triggered again until the end of the Duration.

Table 109 Call schedule edit

Label
Schedule
Name
Active
Start Date
How Often
Start Time
(24-Hour
Format)
Duration Time
(24-Hour
Format)
Action
Apply
Cancel
NN47922-500
Description
Enter a name (up to 16 characters) for the call schedule set. You can use
numbers, the letters A-Z (upper or lower case) and the underscore (_)
and @ symbols.
Select this check box to turn on this call schedule set. Clear this check
box to turn this call schedule set off.
Set the date (in year-month-day format) when you want this call schedule
set to take effect.
Select Once to use this schedule set only one time. Select Weekly to
use this schedule every week.
If you select Once, then enter the date the set will activate in
year-month-day format.
If you selected Weekly in the How Often field, then select the day or
days of the week when the set will activate.
Enter the start time (in hour-minute format) when you want the schedule
set to take effect.
Enter the maximum length of time (in hour-minute format) that the
schedule set is to apply the action configured in the Action field. The limit
is 24 hours.
Select an action for the schedule set to take.
Forced On means that the connection is maintained whether or not
there is a demand call on the line and persists for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not there
is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand
call on the line.
Disable Dial-On-Demand means that this schedule prevents a demand
call on the line.
Click Apply to save your changes to the Business Secure Router.
Click Cancel to exit this screen without saving.