Nortel BSR222 Configuration page 226

226 Chapter 13 VPN
Table 56 VPN Branch Office rule setup
Label
Local IP Address
NN47922-500
Description
This field displays the IP address (or range of IP addresses) of the
computers on your Business Secure Router's local network, for
which you have configured this IP policy.
This field displays the IP policy's virtual IP address (or range of
addresses) when you enable branch tunnel NAT address
mapping in the IP Policy screen.
This field displays a single (static) IP address when the IP policy's
Branch Tunnel NAT Address Mapping Rule Type field is
configured to One-to-one or Many-to-One in the IP Policy
screen.
This field displays the beginning and ending (static) IP addresses
of a range of computers when the policy's Branch Tunnel NAT
Address Mapping Rule Type field is configured to Many
One-to-one in the IP Policy screen.
This field displays the policy's local IP address (or range of
addresses) when you disable branch tunnel NAT address
mapping in the IP Policy screen.
This field displays a single (static) IP address when the IP policy's
Local Address Type field is configured to Single Address in the
IP Policy screen.
This field displays the beginning and ending (static) IP addresses
of a range of computers when the IP policy's Local Address
Type field is configured to Range Address in the IP Policy
screen.
This field displays a (static) IP address and a subnet mask when
the IP policy's Local Address Type field is configured to Subnet
Address in the IP Policy screen.