Configuring Ip Alias - Nortel BSR222 Configuration

Table 15 Static DHCP
Label
IP Address
Apply
Reset

Configuring IP Alias

With IP Alias, you can partition a physical network into different logical networks
over the same Ethernet interface. The Business Secure Router supports three
logical LAN interfaces via its single physical Ethernet interface with the Business
Secure Router itself as the gateway for each LAN network.
To change the IP Alias settings of your Business Secure Router, click LAN, then
the IP Alias tab. The screen appears as shown in
Description
This field specifies the size, or count of the IP address pool.
Click Apply to save your changes to the Business Secure Router.
Click Reset to begin configuring this screen afresh.
Note: Make sure that the subnets of the logical networks do not overlap.
Nortel Business Secure Router 222 Configuration — Basics
Chapter 6 LAN screens 101
Figure 21.