Vpn Client Termination - Nortel BSR222 Configuration

248 Chapter 13 VPN
Table 61 VPN Global Setting
Label
Contivity Client Fail-Over
First Gateway
Second Gateway
Third Gateway
Apply
Reset

VPN Client Termination

Use these screens to configure the Business Secure Router for VPN connections
from computers using Nortel's Contivity VPN Client software. In the WebGUI,
click VPN on the navigation panel and the Client Termination tab to open the
screen illustrated in
of the Contivity VPN client tunnels.
NN47922-500
Description
The Contivity Client fail-over feature allows a Contivity
client to establish a VPN connection to a backup VPN
switch when the default remote VPN switch (specified in
the Destination field) is not accessible.
The VPN fail-over feature must also be set up in the
remote VPN switch.
These read-only fields display the IP addresses of the
backup VPN switches. The Business Secure Router
automatically gets this information from the default remote
VPN switch.
After the remote VPN switch is unreachable or fails to
respond to IKE negotiation, the Business Secure Router
tries to establish a VPN connection to a backup VPN
switch.
Click Apply to save your changes to the Business Secure
Router.
Click Reset to begin configuring this screen afresh.
Figure 79. This screen sets the general settings for use with all