Table 51 Vpn Contivity Client Advanced Rule Setup - Nortel BSR222 Configuration

Table 51 describes the fields in

Table 51 VPN Contivity Client advanced rule setup

Label
Group Authentication Enable Group Authentication to have the Business Secure
Group ID
Group Password
On Demand Client
Tunnel
Apply
Cancel
Note: Click Apply in the VPN - Contivity Client screen to save the
Group Authentication settings.
Figure 71.
Description
Router send a Group ID and Group Password to the remote
VPN switch for initial authentication. After a successful initial
authentication, a RADIUS server associated with the remote VPN
switch uses the User Name and Password to authenticate the
Business Secure Router. You must also configure the Group ID
and Group Password fields when you enable Group
Authentication.
After Group Authentication is not enabled, the remote VPN
switch uses the User Name and Password to authenticate the
Business Secure Router.
Enter the group ID exactly as the VPN switch administrator gives
it to you. This field only applies when you enable Group
Authentication.
Enter the group password exactly as the VPN switch
administrator gives you. This field only applies when you enable
Group Authentication.
Select this check box to have any outgoing packets automatically
trigger a VPN connection to the remote VPN switch.
When On Demand Client Tunnel is not enabled, you need to go
to the VPN Summary screen and click the Connect button to
create a VPN connection to the remote VPN switch.
Click Apply to temporarily save the settings and return to the
VPN - Contivity Client screen. The Group Authentication
settings are saved to the Business Secure Router if you click
Apply in the VPN - Contivity Client screen.
Click Cancel to return to the VPN Contivity Client Rule Setup
screen without saving your changes.
Nortel Business Secure Router 222 Configuration — Basics
Chapter 13 VPN 219