Nortel BSR222 Configuration page 153

Table 34 Edit IP Static Route
Label Description
Metric Metric represents the cost of transmission for routing purposes. IP
routing uses hop count as the measurement of cost, with a minimum
of 1 for directly connected networks. Enter a number that
approximates the cost for this link. The number need not be precise,
but it must be between 1 and 15. In practice, 2 or 3 is usually a good
number.
Private This parameter determines if the Business Secure Router includes
this route to a remote node in its RIP broadcasts.
Select this check box to keep this route private and not included in
RIP broadcasts. Clear this check box to propagate this route to other
hosts through RIP broadcasts.
Apply Click Apply to save your changes to the Business Secure Router.
Reset Click Reset to begin configuring this screen afresh.
Nortel Business Secure Router 222 Configuration — Basics
Chapter 9 Static Route screens 153