Table of Contents
Advertisement
Security Target, Version 3.9
March 18, 2008
2 TOE Description
This section provides a general overview of the TOE as an aid to understanding the general capabilities and security
requirements provided by the TOE. The TOE description provides a context for the TOE evaluation by identifying
the product type and describing the evaluated configuration.
2.1 Product Type
The Nortel VPN Router v7.05 and Client Workstation v7.11 is a hardware and software TOE which combines
network data routing, Virtual Private Network (VPN) connection and acceleration, and firewall capabilities in one
device. This product class makes use of public telecommunication infrastructure (most commonly the Internet) in
order to connect physically discontiguous private network segments to one "virtually contiguous" private network.
Privacy and security of corporate data is maintained through the use of encrypted tunneling protocols within the
VPN connection and various other security procedures when it is in transit over the public network.
A VPN connection requires the creation and operation of a secure tunnel between a VPN client on a remote device
(such as personal computer (PC)) and VPN server software on a VPN security gateway, such as a Nortel VPN
Router.
2.2 Product Description
The TOE is a VPN Router/Firewall which provides three main areas of functionality: it efficiently routes network
traffic to its intended destination; it enables secure Internet Protocol (IP) VPN connections across the public data
network; and it protects the private network from attack by parties on the public network. Each of these functions
are discussed in greater detail below.
The TOE's primary purpose is to allow users of a private (Enterprise) network to have secure access to that network
from a remote location. The TOE provides firewall, routing, encryption and decryption, authentication, and data
integrity services to ensure that data is securely tunneled across IP networks (including the Internet). The Nortel
VPN Router and the Nortel VPN Client are the two components that compose the TOE. Figure 1 below shows a
typical deployment configuration of the TOE:
The World
Enterprise
VPN Tunnel
Corporate
Network
Internet
Nortel
Nortel VPN Router
VPN Client
Workstation
Corporate
Servers
CLI Workstation
Management
Workstation
Figure 1 – VPN Client Deployment Configuration of the TOE
The Nortel VPN Router can also be configured to operate in Branch Office mode. Branch Office mode allows two
separate portions of an Enterprise network to be securely connected to each other via the Internet. In Branch Office
Page 8 of 67
Nortel VPN Router v7.05 and Client Workstation v7.11
© 2008 Nortel Networks
Advertisement
Table of Contents
