Scanning Scenarios; Using Scanwizard Di; Scanning Documents - Microtek ArtixScanDI 6240S User Manual

Scanning Scenarios

Microtek only demos the use of the ScanWizard DI (PC) in succeeding pages in
this guide. For more details about using the ScanPotter (Mac) to scan your
documents, please refer to the ScanPotter Reference Manual in the Microtek
software CD/DVD.

Using ScanWizard DI

ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale in both duplex and simplex
modes. Its user-friendly interface enables you to easily start the scanning process.
Refer to the ScanWizard DI Reference Manual for more details.

Scanning Documents

1. Load the documents to be scanned onto the scanner's document feed tray.
2. Launch ScanWizard DI as a stand-alone program by clicking on the
3. Click the Scan Setup button in the interface to activate the Scan Setup
4. In the Scan Setup interface, follow the steps below to specify your basic
Warning:
• Do not place photos or fragile materials in the feed tray, for it will damage
the originals when performing the feeding process.
• Before using the ScanWizard DI, make sure that your anti-virus software
program has been turned off. Otherwise, the scanning speed may be
affected.
ScanWizard DI icon on the desktop.
interface.
settings.
a) Select ADF (Front Side), ADF (Back Side) or
ADF (Duplex) in the Scan Source as your
image input device.
b) Select the appropriate image type in the Color
Mode as your image output type.
– Select RGB Color (24 bits) to scan the
image in color.
– Select Grayscale (8 bits) to scan the
image in grayscale.
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual 25