Scanning Scenarios; Using Scanwizard Di; Scanning Documents - Microtek FileScan 3125c User Manual

Scanning Scenarios

Using ScanWizard DI

ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale in both duplex and simplex
modes. Its user-friendly interface enables you to easily start the scanning
process. Refer to the ScanWizard DI software manual for more details.
The following sections will show you step by step how to use ScanWizard DI.

Scanning Documents

1. Load the document to be scanned into the document feed tray of the
2. Launch ScanWizard DI as a stand-alone program by clicking on the
3. Click the Scan Setup button in the interface to activate the Scan Setup
4. In the Scan Setup interface, follow the steps below to specify your basic
Warning:
• Do not place photos or fragile materials in the feed tray, for it will
damage the originals when performing the feeding process.
scanner.
ScanWizard DI icon on the desktop.
interface.
settings.
a) Select ADF (Front Side), ADF (Back Side) or
ADF (Duplex) in the Scan Source drop-down
menu as your image input device.
b) Select the appropriate image type in the Color
Mode as your image output type.
– Select RGB Color (24 bits) to scan the
image in color.
Select Grayscale (8 bits) to scan the
–
image in grayscale.
– Select Black & White (1 bit) to scan the image in black-and-white.
– Select Auto Color Detection to scan the image in color or non-color
based on the automatic judgement and detection of the system.
– Select Complex to scan the image in color, grayscale or non-color
based on the customization.
FileScan 3125c User's Manual 19