Table of Contents
Advertisement
Connecting to an External USB Device
The scanner comes with two USB ports, one is used to connect with the
computer, and the other is used to connect with an external USB device such
as an USB storage device or USB hard drive.
1. Follow the procedure (Steps 1 through 4) for "Initial Setup" section to
2. Connect an external USB device to your scanner.
3. Turn on your computer.
NOTE: Your scanner has to be connected to your computer and plugged into
a power source first, and then both of them need to be powered on. At this
moment, the external USB device connected through the scanner may be
detected and work properly.
18
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
connect your scanner first.
The system will start to locate your external USB device. When the
external USB device is found, the found USB device appears on the
device list, indicating your external USB device is ready for use.
Advertisement
Table of Contents
Need help?
Do you have a question about the ArtixScanDI 6240S and is the answer not in the manual?
Questions and answers