How To Scan The Document Using The Document Sheath (Optional) - Microtek ArtixScanDI 6240S User Manual

How to Scan the Document Using the
Document Sheath (Optional)
A document sheath is an optional accessory for
the scanner you purchased. It is a transparent
and unfoldable coverings used together with
your scanner when combing two images as one
through the ADF. It is very useful when you
want to scan an A3 size document with an A4
scanner.
To scan an A3 size document by using the document sheath,
A. Insert an A3 Size Document into the Sheath.
1. Fold the A3 size document at the point you want.
2. Open the sheath and then insert the document into the sheath, with the
side to be scanned as the first image facing down. Position the top end of
the document toward the inner side of the sheath.
3. Push the document into the sheath until its top end is against the inner
side of the sheath (the side with an arrow mark). Then, close the sheath.
Sheath
B. Load the Sheath into the ADF.
1. Load the sheath with the
document onto the ADF, with the
side to be scanned as the first
image facing down and the edge
of the sheath (the side with an
arrow mark) facing toward the
feeder.
2. Push the sheath into the feeder
until it's edge touches the bottom
edge of the feeder.
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual 53