Scanning Cards - Microtek ArtixScanDI 6240S User Manual

Scanning Cards

This scanning scenario guides users to scan any hard-copied card into an image
and saves it for viewing or recording purpose. It helps users to skip complicated
scan settings.
1. Load the card to be scanned onto the scanner's document feed tray.
2. Launch ScanWizard DI as a stand-alone program by clicking on the
ScanWizard DI icon on the desktop.
3. Switch scan mode to the "Card Scan" mode. Click the arrow icon next to the
Scan mode button, and then select "Card Scan".
4. Click the File Format menu button to select a file format for the scanned
images.
5. Click the File Name menu button to specify a file naming method for the
scanned images.
6. Click the Card Scan button to start scanning.
When done, the scanned images will be automatically saved into the folder
defined in the File Location menu box. At the same time, the scanned images
will be displayed in thumbnail sizes in the Thumbnail View window and
labeled with the file name and file format specified earlier.
7. Click the Open Folder button to locate the scanned images if you want to
view.
File Location
menu box
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual 31