Positioning Documents; To Load A Stack Of Documents - Microtek ArtixScanDI 6240S User Manual

Positioning Documents

This section shows you how to position a stack of documents and hard cards,
including embossed cards into the feeder.

To Load a Stack of Documents

1. Fan the stack of papers to be
2. Align the top edges of the papers
3. Load the stack of papers onto the
scanned before putting them onto
the Document Feed Tray.
neatly.
Document Feed Tray, with the
side to be scanned facing down
and the top edge facing toward
the feeder.
Push the stack of papers into the
tray until the paper's edge touches
the bottom edge of the feeder.
WARNING: The document feeder
is not designed for scanning
photos; doing so may damage
your originals. Microtek accepts
no responsibility for damage that
may arise from misuse of
equipment.
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
Document Feed Tray
19