Care And Cleaning; Cleaning The Scanner Glass Surfaces - Microtek ArtixScanDI 6240S User Manual

Care and Cleaning

To ensure optimal performance from the your scanner, it is important to clean
several critical parts of the scanner on a regular basis. The recommended cleaning
cycle time would be after 3,000 to 5,000 scans.

Cleaning the Scanner Glass Surfaces

1. Lift up the Release button in the direction as shown in the graph to open the
2. When the scanner cover is opened, you can find two scanner glass surfaces
NOTE: Do not use any detergents, synthetic cleaning solutions, cleaning naphtha,
or other solvents to clean the glass surface directly. To remove stains, use cotton
swabs moistened with rubbing alcohol.
scanner cover.
Scanner cover
locating at the inner sides the scanner. Use a soft, non-abrasive and lint-free
cloth to gently wipe the glass surface areas.
Scanner Glass Surfaces
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
Release button
41