Scanning Scenarios; Using Scanwizard Di; Scanning Documents - Microtek XT7000 HS User Manual

Scanning Scenarios

Using ScanWizard DI

ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale. Its user-friendly interface
enables you to easily start the scanning process. Refer to the ScanWizard DI
Reference Manual for more details.
Warning:
•
The following sections will show you step by step how to use ScanWizard DI.

Scanning Documents

1. Place the document to be scanned facing down on the scanner's glass
2. Launch ScanWizard DI as a stand-alone program by clicking on the
3. Click the Scan Setup button in the interface to activate the Scan Setup
4. In the Scan Setup interface, follow the steps below to specify your basic
Before using the ScanWizard DI, make sure that your anti-virus software
program has been turned off. Otherwise, the scanning speed may be
affected.
surface.
ScanWizard DI icon on the desktop.
interface.
settings.
a) Select Flatbed in the Scan Source as
your image input device.
b) Select the appropriate image type in the
Color Mode as your image output type.
– Select RGB Color (24 bits) to scan
the image in color.
– Select Grayscale (8 bits) to scan the
image in grayscale.
– Select Black & White (1 bit) to scan
the image in black-and-white.
Select Auto Color Detection to scan the image in color or non-color
–
based on the automatic judgement and detection of the system.
– Select Complex to scan the image in color, grayscale or non-color
based on the customized selections.
XT7000 HS Scanner User's Manual 19