Menus - Thermo Scientific Wellwash User Manual

Menus

The software includes the Main, Settings, and Maintenance menus.
The menu tree is displayed in Table 2.
Table 2. Program overview
Main

Protocol

Head / Plate

Well

Steps

Layout
Press the START button to start the execution of the currently selected
protocol.
Press the STOP button to terminate protocol execution.
Pressing the key also returns the software to the previous state.
Use the character keys to enter numerical data and text.
•
The space character is found under the 1 key.
•
The following special characters are found under the . / 11 key:
. – _ ' + ! ? % : ( )
•
The µ character is found under the mno / 6 key.
The CLEAR (C / 12) key is used to delete written text or numbers.
Use the keys to select strips. Refer to "Strip selection with the number
keys".
To write an uppercase letter, press the desired letter key repeatedly until
the capital appears.
Settings

Prime parameters

Sensors

Wash head configuration

System

Reports
Maintenance

Clean

Calibration

Service
26