Using The Touch Panel; Administration Configuration Menus; Network - Thermo Scientific SlideMate AS Operator's Manual

Using the Touch Panel

Administration Configuration Menus


From the main start up screen press the settings button.

Enter the pass code 7251.
Note
If the password option is not enabled, you can activate in the
Printer Section of the Settings Menu.

Press the tick button.

The settings menu will then be displayed:

Network

This will populate when connected to a
IP Address
network.
Connect to Select this option to when you want to
Hub connect to a Hub.
This allows connection to the Gateway
Connect to
software. This will be used when sending
Gateway
data from a LIS to a cache directory.
A83910100 Issue 1
27