F-1-30
1.2.6 Checking the Image
Quality
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Plug the power cord into the outlet, and then turn on
the main power switch [2].
Supply of toner will start after the initial rotation.
After a few minutes, supply of toner finishes and
the machine stops automatically.
Use the specified power supply (rated voltage -/+10%
and rated current).
[2]
F-1-31
2) Place a document on the document glass, take a
copy of it by supplying paper from the cassette or
manual feed tray, and check the printed image. Also
perform the following checks:
[1]
[2]
0011-1075
[1]
- Check whether abnormal sound is heard.
- Check the printed images at all preset magnifica-
tions.
- Check whether the document is copied normally on
the specified number of sheets.
1.2.7 Setting the Country/
Region
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Press the following keys to display the service
mode screen:
Additional Functions Key > 2 Key > 8 Key > Addi-
tional Functions Key
2) Select "# CLEAR" using the + or - key, and then
press the OK key.
3) Select "TYPE" using the + or - key, and then press
the OK key.
4) Using the + or - key, select the country/region type
that conforms to the communication standard used
in the country/region where the machine is used.
5) Press the OK key. When "Please Wait" disappears,
the selected country/region type takes effect.
1.2.8 Setting the Date
and Time
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Press the additional functions keys to display the
user mode screen.
2) Select "4. TIMER SETTINGS" using the + or - key,
and then press the OK key.
3) Select "1. DATE&TIME SETTING" using the + or
- key, and then press the OK key. The set date and
time appears.
4) Enter the current date and time by moving the cur-
sor to the characters you want to enter with the +
and - keys.
5) Press the OK key to allow the entered date and time
to take effect.
Chapter 1
0011-1077
0011-1078
13
Need help?
Do you have a question about the iR2020 Series and is the answer not in the manual?