1.2.3 Installing the Toner
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
If the machine is installed in a low-temperature, low-
humidity place, the image density may be slightly
lower than usual on the first approx. 100 sheets print-
ed after installation of the machine.
When installing the machine in a low-temperature,
low-humidity environment, perform the steps men-
tioned in <Going through the Developer Idling
Mode> (provided after step 6 in this section) before
installing the toner bottle.
1) Shake the toner bottle 5-6 times.
2) Open the front cover .
3) Insert the toner bottle.
4) While holding the toner bottle, pull the seal  to
5) Turn the toner cartridge in the direction of the ar-
row until it stops.