4Registering The Card Ids - Canon iR2020 Series Installation Procedure

Chapter 1
F-1-53
19) Attach the rear cover with the repeating harness B
routed through the cut portion of the rear cover.
F-1-54
1.4.4 Registering
Card IDs
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
After installing the card reader-E1, register the card
numbers to be used in the service mode of the iR body.
If they are not registered, cards will not be recognized
when inserted.
22
[1]
[1]
the
0011-1083
1) Plug the power cord [1] into the outlet, and then
turn on the main power switch [2].
[2]
F-1-55
2) Press the following keys to display the service
mode screen:
Additional Functions Key > 2 Key > 8 Key > Addi-
tional Functions Key
3) Select "# ACC" using the + and - key, and then
press the OK key.
4) Select "CARD" using the + and - key, and then
press the OK key.
5) Specify the first ID number of the card ID numbers
to be registered, and then press the OK key.
Sequential Card ID numbers of 100 cards(*) are au-
tomatically registered in the department ID, starting
with the specified card ID number.
* When an optional ROM is added, card ID num-
bers of 1000 cards are registered.
6) Press the Additional Functions key to enter the user
mode.
7) Select "SYSTEM SETTINGS" using the + and -
key, and then press the OK key.
8) Select "MANAGE DEPT. ID" using the + and -
key, and then press the OK key.
9) Select "ON" using the + and - key, and then press
the OK key.
10) Turn main power switch off and on again. Check
that "INSERT CARD" appears.
[1]