Download Print this page

Lock Code; Control Panel Switch-Off Status - Miele WDD320 SpeedCare 1400 Operating Instructions Manual

Hide thumbs

Advertisement

Programmable functions
 Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = Lock code switched off (fact-
ory default setting)
 = Lock code is switched on
Using the washing machine with a

lock code

The code is 125 and cannot be altered.
 Switch on the washing machine.
   appears in the time display and
the  and  sensors light up.
 Touch the  sensor.
   appears in the time display.
 Confirm the number with the Start/
Stop sensor.
The first number was saved and you
can now enter the second number us-
ing the  and  sensors.
 Also enter the second and third num-
bers and confirm the numbers with
the Start/Stop sensor.
The lock is released and a wash pro-
gramme can now be selected and star-
ted.
76
 Control panel switch-off
status
To save energy the time display and
sensors will go out after 10 minutes,
and only the Start/Stop sensor will
flash slowly.
Options
 = Off
The time display and sensors
will remain lit up while the
washing machine is switched
on

= On (factory default setting)
The time display and sensors
will switch off after 10 minutes
if
– no further selection is made
after switching the machine
on
– the programme is started
However; the time display and
sensors will remain lit up for 10
minutes after a delay start time
has elapsed, after the end of
the programme or at the end of
the anti-crease phase.

Hide quick links:

Advertisement

loading