Miele WDD320 SpeedCare 1400 Operating Instructions Manual page 45

Dispensing fabric conditioner
and liquid starch at the end of
the programme
 Add the fabric conditioner or liquid
starch to the  compartment or in-
sert the appropriate capsule. Do not
exceed the maximum level mark.
The agent will be automatically dis-
pensed in the last rinse. At the end of
the programme a small amount of water
will remain in the  compartment.
Starch can make the siphon tube
sticky.
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.
Adding fabric conditioner or liquid
starch separately
Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.
Tip: When adding fabric softener, activ-
ate the Water plus extra.
 Add fabric conditioner to the  com-
partment or insert the appropriate
capsule.
 Add liquid starch to the  compart-
ment and powder or viscous starch to
the  compartment.
 Select the Separate rinse/Starch pro-
gramme.
 Change the spin speed if necessary.
 Activate the Cap  sensor if using a
capsule.
 Touch the Start/Stop sensor.
Colour run and dye removers/dyes

Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing ma-
chine.
Do not use colour run or dye re-
movers in this washing machine.
Dyes suitable for use in domestic wash-
ing machines can be used. However,
please note that the salt used in the
dyeing process can cause corrosion to
stainless steel components in the ma-
chine if you use dye frequently. Always
observe the dye manufacturer's instruc-
tions carefully.
When using the machine to dye fab-
ric it is essential to select the Water +
option.
Detergent
45