Download Print this page

Reduce Temperature; Water Plus; Water Plus Level; Maximum Rinse Level - Miele WDD320 SpeedCare 1400 Operating Instructions Manual

Hide thumbs

Advertisement

Programmable functions
 Reduce temperature
The boiling point for water is lower at
high altitudes. In order to avoid water
boiling, Miele recommend activating
the reduce temperature setting at alti-
tudes of more than 2000 m above sea
level. The maximum temperature is re-
duced to 80 °C even when a higher
temperature is selected.
Options
 = The reduce temperature setting
is switched off (factory default
setting)
 = The reduce temperature setting
is turned on
 Water plus
You can determine the amount of wa-
ter used if the Water plus extra is se-
lected.
Options

= More water is used in the wash
and rinse stages (factory de-
fault setting)
 = An extra rinse is carried out
 = The water level is increased in
the wash and rinse stages and
an additional rinse is carried
out
78
 Water plus level
There are three different water levels
which can be selected by activating
the Water plus extra.
Options

= No higher water level (factory
default setting)
 = Water level increase by 1 level
when washing and rinsing
 = Water level increase by 2 levels
when washing and rinsing
 = Water level increase by 3 levels
when washing and rinsing
 Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy suffer-
ers as it achieves an excellent rinse res-
ult. Water consumption will increase.
Options
 = Maximum rinse level is
switched off (factory default
setting)
 = Maximum rinse level is
switched on

Hide quick links:

Advertisement

loading