Changing The Programme Sequence; Changing A Programme; Cancelling A Programme; Interrupting A Programme - Miele WDD320 SpeedCare 1400 Operating Instructions Manual

Changing a programme

After the successful start of a pro-
gramme it is no longer possible to
change the programme.
If you would like to change the pro-
gramme, you have to cancel the pro-
gramme.

Cancelling a programme

You can cancel a wash programme at
any time after it has started.
 Touch and hold the Start/Stop sensor
until the time display switches to
:.
The water will be pumped away. As
soon as the  symbol in the control
panel goes out, the programme has
been cancelled.
 Open the door.
Selecting a different programme after
cancelling the programme
 Close the door.
 Check that there is still detergent in
the dispenser drawer. Add more de-
tergent if necessary.
 Turn the programme selector to the
programme you want and start it by
pressing the Start/Stop sensor.

Changing the programme sequence

Removing laundry after cancelling
the programme
If you want to remove the laundry when
it is dripping wet:
 Open the door.
 Remove the laundry.
If you want to remove the laundry after
it has been spun (damp):
 Open the door.
 Close the door.
 Turn the programme selector to
Drain/Spin.
Tip: Select an appropriate spin speed.

Interrupting a programme

 Turn the programme selector to the
 position.
The washing machine switches off.
 To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.
Tip: If  appears in the time display,
the programme selector is in the incor-
rect position.
39