Companion Software Updates; Device Software (Firmware) Updates; Battery Replacement - Noraxon Ultium EMG System User Manual

Ultium EMG Hardware User Manual

8.3 Companion Software Updates

Perform a backup of the data folders to a separate drive as a precaution.

Click on the Patch/Update link provided in the email or as given on the

Download the Patch/Update file.

To install the Patch/Update, click "Run" on the dialog box. No password is required.


8.4 Device Software (firmware) updates

The internal program (firmware) inside the various Ultium devices can be updated via MR3. The user
will be notified if an update is required.
All EMG sensors should be fully charged before a firmware update is performed.
CAUTION

8.5 Battery Replacement

8.5.1 Battery Life Expectations
The Lithium Polymer battery used in the EMG sensors is rated for a minimum of 300 charge-discharge
cycles. Typical usage is 500 charge-discharge cycles. As the number of charge-discharge cycles
increases the battery capacity slowly declines thereby reducing run time despite being fully charged.
Brand new batteries can operate up to 8 hours when fully charged. If the run time of the sensors drops
to 5-6 hours, battery replacement should be considered.
(Rev J)
Noraxon website.
32