Ultium Receiver Overview - Noraxon Ultium EMG System User Manual

Ultium EMG Hardware User Manual

5.2 Ultium Receiver Overview

The below section will over the key components of the Ultium system receiver, sensor, and charging
dock. Additional information can be found around the indicators and operation of the system in the
following sections.
(Rev J)
Receiver (Front)
1. 1. 1. 1. Status LED Status LED Status LED – Indicates the status of the Receiver. Status LED
2. 2. 2. 2. Charging Dock Port Charging Dock Port – Connects the Sensor Docking Station to
Charging Dock Port Charging Dock Port
the Receiver for communication.
Receiver (Back)
1. 1. 1. 1. Sensor Power Button Sensor Power Button – Push to toggle power on sensors
Sensor Power Button Sensor Power Button
inserted into connected chargers.
2. 2. 2. 2. Docking Ports Docking Ports - Allows docking stations to be connected for
Docking Ports Docking Ports
power and data communication to sensors.
3. 3. 3. 3. USB Port USB Port – USB connection between the computer and receiver.
USB Port USB Port
4. 4. 4. 4. Lockstep Lockstep – Reserved for future use.
Lockstep Lockstep
5. 5. 5. 5. AUX1, AUX2, AUX3 AUX1, AUX2, AUX3 – Connect auxiliary accessories (Analog AUX1, AUX2, AUX3 AUX1, AUX2, AUX3
Output).
8. 8. 8. 8. Sync Sync – TTL (on-off) compatible 3.5 mm stereo jack connection Sync Sync
to other devices.
9. 9. 9. 9. Charger Power Charger Power – Apply 5V (PSU1) to power up to 2 EMG Sensor
Charger Power Charger Power
Docking Stations.
13