Ultium Emg Sensor Overview - Noraxon Ultium EMG System User Manual

Ultium EMG Hardware User Manual

5.3 Ultium EMG Sensor Overview

(Rev J)
EMG Sensor (Front & Top)
1. 1. 1. 1. Status LED Status LED – Sensor operational indicator flashes green when
Status LED Status LED
measuring. Solid Yellow when charging.
2. 2. 2. 2. Power Button Power Button – Power the sensor On/Off. Hold for 3+
Power Button Power Button
seconds for a hard reset.
3. 3. 3. 3. Charger Charger Contacts Charger Charger Contacts – – – – Sensor battery is charged and sensor Contacts Contacts
data is exchanged through these points.
EMG Sensor (Back & Bottom)
1. 1. 1. 1. Reference Electrode Reference Electrode– – – – Third electrode that provides a ground Reference Electrode Reference Electrode
reference for the differential signals collected by the EMG
leads attached to the surface electrode.
2. 2. 2. 2. Smart Lead Connector Smart Lead Connector – – – – Connector for smart leads to change Smart Lead Connector Smart Lead Connector
function of EMG sensor.
14