Software Installation - Noraxon Ultium EMG System Quick Start Manual

Ultium EMG Quick Start Guide
3 Installing the companion Software - myoResearch™ 3
To utilize the full functionality of the Ultium EMG system, and ensure the system has updated drivers,
Noraxon's myoResearch 3 (MR3) needs to be installed on the computer.
Note: The Ultium Receiver requires the Noraxon USB device driver which is pre-installed by the MR3
software installation. It is also available in the

3.1 Software Installation

Within the package the Ultium System was shipped in, there is a USB flash drive containing the latest
myoResearch 3 software.
1. Insert the MR3 USB flash drive into the PC
2. A menu will automatically pop up
3. Click on the Noraxon installation file and follow the Wizard's instructions
4. After installation, an icon will be created on the desktop
3.2 Companion Software Activation
The installed companion software must be activated before unrestricted use is possible.
1. Open MR3
2. A dialog box will indicate how many more times
MR3 can be opened
3. Click on "Activate"
4. Enter the License ID provided on your USB flash
drive and press "OK"
5. If you have an internet connection, click Activate by
Internet for immediate activation
6. Alternatively, email the provided activation ID to
activation@Noraxon.com
7. Noraxon Support will email or respond by phone
with the Activation Code
8. Enter the provided Activation Code to remove any restrictions on use.
(Rev A)
Downloads Section of the Noraxon website.
6