Activating The Training Mode; Exiting The Training Mode; Cash Register Programming - Olivetti ECR 2500 Euro Instruction Manual

Activating the Training Mode

Proceed as follows to switch the cash register into the training
mode:
1. Turn the PRG control key to the PRG position.
2. Type [666666] and press the [amt tend/total] key. A dot indicat-
ing the Training Mode On condition is displayed on the left-hand
side of the operator and customer displays.
3. Turn the key to the REG 1 or REG 2 position to perform normal
cash register operations.

Exiting the Training Mode

Proceed as follows to exit the training mode and therefore re-enable
the cash register to record all sales transactions in the X and Z
management reports and in the machine totals.
1. Turn the PRG control key to the PRG position.
2. Type [555555] and press the [amt tend/total] key.
3. Turn the key to the desired operating position.

Cash Register Programming

This cash register can be programmed to tailor its features according
to your specific needs. This programming facility allows you to:
• Define three-digit secret codes for each of the 26 programmable
clerks
• Define clerk names
• Set a machine number
• Set the date and time
• Personalize the customer receipt header
• Set percent discount (-%) rates
• Set percent plus (+%) rates
• Define fraction rounding
• Define decimal point positions
• Define up to four VAT rates
• Define Price Look-Ups (PLUs) for individual items and enter an
item description
• Define tax status and High Digit Lock Out to the minus key
• Define tax status, High Digit Lock Out, Single/Multiple item sale
and relative price to a determined defined department
• Set an exchange rate for the Euro currency
• Personalize the Euro and Local captions, the net converted, Credit-1,
Credit-2 and media-in-drawer captions on the receipts and reports
• Program the different system options available
• Print programming reports
• Define manager passwords for the PRG, X and Z modes.
Set some of or all of the above features, depending on your business
needs. These program settings will reside in the cash register's memory
until you change them or reset the memory by pressing the Reset button
located at the rear left-hand side of the printer compartment.
The cash register's memory can also be cleared by means of specific
programming sequences. Refer to the section Clearing the Cash
Register's Memory.
15