Activating And Disactivating Training Mode; Using The Memory Storage Device (Sd) - Olivetti ECR 7900 User Manual

A D
CTIVATING AND
Training mode can be activated in one of these three ways:
•
from Programming mode
•
from Registration mode
•
when a Training clerk logs on.
Programming mode:
1. Select Training Mode On/Off.
2. The prompt appears: Now off, turn on? Use
Training mode is now active and you can log on either as a Clerk or the Manager and perform sales transactions and
programming in Training mode.
To disactivate Training Mode the procedure is identical, except that at step 2 the prompt appears Now on, turn off?
Highlight YES and press
Registration mode:
To activate Training mode from Registration mode, a Training mode password must have been set up (see "Setting Up
Manager Passwords"). Outside of a transaction, enter the password and press
appears at bottom left to indicate that Training mode is active.
To exit Training mode, repeat the same procedure again.
Training Clerk Logon:
When a clerk is programmed as a Training clerk and the Clerk System is active, all sales transactions are registered
exclusively as training activities.
U M
SING THE EMORY
This section explains how to perform standard operations on the SD card such as loading programming and PLU data
from it, and saving data to it. The SD card can also be used for storing electronic journal data as described in "System
Main menu -> Programming Mode -> SD Maintenance
Initialization". Select
and enter its data (see "Data Entry Mode" for the keys to use). At the end, you can press
menu or to return to the previous menu.
Menu Item Possible Values
Load from SD All Programming Data,
Card PLU Data, Graphic Logo.
Save to SD Card All Programming Data,
PLU Data, Graphic Logo.
Format SD Card YES, NO
28
T
ISACTIVATING RAINING
.
S D
TORAGE EVICE
M
ODE
or to highlight YES and press
(SD)
. Navigate to the field you want to personalize
Description
Select the data to load from the Storage Device.
Select the data to save to the Storage Device.
Select this option to format the SD card, canceling all data on it.
.
.
The Training mode symbol
to return to the Main