SET 162 – ROUNDING TYPE SELECTION
This is used to set the type of rounding to apply to the total.
Operating procedure
1.
.1. .6.
2. .X.
2.
.0. .X.
.1. .X.
.2. .X.
.3. .X.
Factory setting
SET 170 – TRAINING MODE
The option SET170 is used to select the Training environment (that can be run at any
time, without requiring any particular set-up).
In Training mode, all normal operations can be performed as during normal use of
the cash register.
Sales tickets and invoices are differentiated from those issued during normal
operation by the character "#"printed before the "Ticket Number" caption.
Operations performed in Training mode are not saved in the EJ.
On exiting from Training mode, the register is reset with all the values and settings
that were in effect before entering Training Mode.
To set up Training mode:
Select the option SET 170 followed by the key
0 followed by
.X.
1 followed by
.X.
SET 200 - PRINT SERIES 200 OPTIONS LIST
This function allows you to print the settings for the icons and promotional messages.
Operating procedure
1.
2.
12
No rounding *
SWISS FRANC
DANISH KRONE
EURO
= to disable
= to enable
.2. .0. .0. .X.
.X.
Starts printing.