Table of Contents
Advertisement
Voiding Errors
Once an entry is printed, the [clear] key cannot be used to clear an
error. Press the [void] key to correct an error already registered.
Voiding the Entry Just Completed
Simply press the [void] key. The entry is reprinted with a "-" symbol
followed by the amount and erased from the transaction.
Voiding an Earlier Entry
To void an earlier entry, register it again and then cancel it using the
[void] key. When a transaction including the error is completed,
proceed with the following steps to void the error.
1. Retype the incorrect information, exactly as originally entered, and
press the [void] key.
2. Enter the correct amount.
3. Total the transaction by pressing the [amt tend/total] key.
Memory Back-up Battery System
During cash register operations, all transaction data for the manage-
ment reports are stored in the cash register's memory. This memory also
holds all of the cash register's programming data. The memory back-up
battery inside the cash register keeps this information stored in memory
when the cash register is unplugged from the power outlet or when a
power failure occurs.
To activate the memory back-up battery system, charge the backup
battery by keeping the cash register plugged into a grounded power
outlet for at least 48 hours. The cash register can be used normally
during this period of time.
Printer Compartment
The printer compartment is on the upper left-hand side of the cash
register. It houses the customer receipt and journal paper rolls, journal
winder spindle, inked ribbon cartridge, the dot-matrix printer and the
Reset button.
Ribbon Cartridge
This cash register uses a standard inked ribbon cartridge that needs
replacing when faded characters are starting to print. The next section
explains how to install the ribbon cartridge.
Installing the Ribbon Cartridge
Proceed as follows when you wish to install a new cartridge:
1. Turn the Control Lock to the OFF position, unlock the printer
compartment cover and remove it from the cash register by firmly
gripping the back of the cover and gently lifting the front upwards
to release its snap features from the case.
9
Advertisement
Table of Contents
