Programming Chart And Description Of The Sub-Menu: Tel. Line Set-Up - Olivetti OFX 1000 Instruction Manual

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: TEL. LINE SET-UP

EXT. LINE: PREFIX
TYPE PREFIX:
(0-9):
RING COUNT: 01
FAX/TEL TIMER:15
SILENCE LAPSE: 4
START: Confirms selection of the sub-menu TEL. LINE SET-UP and moves down to the associated
parameters. Confirms a parameter and the relative value and moves on to the next parameter.
< / > : To select the value of a parameter by scrolling forward and backward through the values
available. Alternatively used to position on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
INSTALLATION PARAMETERS
TEL. LINE SET-UP
PRIV. LINE (PBX)
PBX DIAL: PULSE
EXT. LINE: EARTH
Ø
0
PSTN DIAL: PULSE
REMOTE START: ON
Ø
TYPE CODE
CODE (0/9, * )
RING COUNT: 02
FAX/TEL TIMER:20
SILENCE LAPSE: 6
Ø
PUBL. LINE (PSTN)
Ø
PBX DIAL: TONE
Ø
EXT. LINE: FLASH
Ø
PSTN DIAL: TONE
Ø
REMOTE START: OFF
**
Ø
RING COUNT: 04
Ø
FAX/TEL TIMER:30
Ø
SILENCE LAPSE: 8
RING COUNT: 08
FAX/TEL TIMER:40
SILENCE LAPSE: 10
41