Table of Contents
Advertisement
10.
Press START to confirm that you wish to memorise also the
telephone number. The display will show the original message.
IF...
•
you do not want to memorise the telephone number, press
STOP.
11.
Repeat step 4 pressing the key 01 again. At step 5, after
pressing START, this time select the TEL NO. option and
confirm with START.
At step 6 enter the phone number 564321 and confirm by
pressing START. As there is no need to repeat the next steps,
you can terminate the programming procedure at this point by
pressing STOP.
You have now programmed key 01 with all the information in the
table, including the fax and phone numbers.
IF...
•
you do not want to memorise the telephone number, press
STOP.
•
you want to make sure that all the information has been
entered correctly, you can repeat the procedure and check it
on the display.
•
you want to change any of the information stored, repeat the
procedure and overwrite with the new information.
62
TYPE ONE TOUCH
KEY: 01-10
AUTOMATIC RX
21-02-95
10:30
DIALLING
Advertisement
Table of Contents
