Connection To The Telephone Line And Electrical Power Supply - Olivetti OFX 1000 Instruction Manual

CONNECTION TO THE TELEPHONE LINE AND ELECTRICAL POWER SUPPLY

Before connecting the fax to the electrical power supply it is necessary to connect it to the telephone line.
NOTE:
Since connection to a telephone line of a fax, telephone, answering machine or other device depends on
national standards which vary from country to country, the information which follows illustrates a generic
connection (case 1) and a specific connection for Germany and Austria (case 2).
c
CONNECTION TO THE TELEPHONE LINE (CASE 1)
Of the Fax
Connection between the fax and telephone line is made using the cable which is provided. Do not use
other cables, otherwise functioning of the fax is not guaranteed.
1.
Insert the telephone line connection cable's "miniature" connector (which is small and transparent)
into the "LINE" socket on the fax. You will hear a click which indicates that it has been inserted
correctly (see the diagram which follows). The fax's telephone line connection sockets are situated
on the rear left-hand side of the casing. The TEL1 and TEL2 sockets cannot be used in some
countries.
2.
Insert the plug (which differs from country to country) on the other end of the cable into the
telephone wall socket (see the diagram which follows).
IF...
•
the network to which the fax machine is connected has more than one socket connected in
series, the fax machine must be connected to the primary socket.
Of the Telephone
Option 1: The telephone line connection cable provided with the fax has an extension plug
(with socket).
Plug the telephone cord into the extension plug (with socket).
IF...
•
the network to which the fax machine is connected has more than one socket connected in
series, you must use an approved model of telephone.
Option 2: The telephone line connection cable provided with the fax does not have an
extension plug (with socket).
If necessary, remove the pre-cut tab that covers the fax's telephone line connection socket (TEL1),
then insert the telephone cord's "miniature" connector into the above-mentioned socket. You will
hear a click which indicates that it has been inserted correctly (see the diagram which follows).
Of the Answering Machine
Option 1: The telephone line connection cable provided with the fax has an extension plug
(with socket).
Plug the answering machine cable into the extension plug (with socket).
Option 2: The telephone line connection cable provided with the fax does not have an
extension plug (with socket).
If necessary, remove the pre-cut tab that covers the fax's telephone line connection socket (TEL2),
then insert the answering machine cable's "miniature" connector into the above-mentioned socket.
You will hear a click which indicates that it has been inserted correctly (see the diagram which
follows).
12
CONNECTION AND INITIAL SET-UP