9 LCD Menu Operation
If the input password is 1111, user can enter into the normal parameter setting page and set
the system parameters, running parameters, protection parameters and communication
parameters.
Press "Enter" to confirm the password input.
Step 5
If the password is incorrect, an "Error password" window will appear. Tap "Enter" and
Step 6
re-enter the password.
9.5 Language Setting
User can set the language by either of the following two ways:
9.5.1 Conventional Way
Tap "Function" from the default menu;
Step 1
Tap "Set-parameter";
Step 2
Tap "Sys-parameter" after entering the correct password;
Step 3
Tap "Language & Firmware Ver." and enter into the language and firmware version
Step 4
sub-menu;
Step 5
Select the target language.
9.5.2 Shortcut
The language setting shortcut (A) is at the lower right side of the Home menu. Select either
language by tapping the language button.
By tapping the button, the language will switch among English, Chinese, French and Italian.
Language on the button is the present display language of the display.
52
System Manual